ESTONIAN ACADEMY
PUBLISHERS
eesti teaduste
akadeemia kirjastus
PUBLISHED
SINCE 1984
 
Oil Shale cover
Oil Shale
ISSN 1736-7492 (Electronic)
ISSN 0208-189X (Print)
Impact Factor (2022): 1.9
ACHIEVING RESILIENCE AND SUSTAINABILITY THROUGH INNOVATIVE DESIGN FOR OIL SHALE PYROLYSIS PROCESS MODEL; pp. 142–150
PDF | https://doi.org/10.3176/oil.2019.2S.05

Authors
JIMMY JIA, ROB QIAN, JILAI HE
Abstract

Low international oil price, advance in renewable energy technology, development of energy storage technology and strict environ­mental regulations have presented encumbrance and opportunity for the current oil shale project development. Oil shale industry is at critical stage and facing challenges from competitive conventional energy, clean renew­able energy and more strict environmental regulations. Through an innovative design of the oil shale pyrolysis process model by utilizing a developed new advanced technology, the oil shale project could improve its resilience and sustainability with excellent social and economic performance.
   This paper investigated the shale oil production process in terms of technology selection, utilization of resource, energy efficiency, oil yield, and mining to improve the resilience of oil shale project economic performance facing lower oil price. Innovative design options for the oil shale production process model were discussed from the following aspects: 1) itemized cost analysis and comparison of shale oil production technologies; 2) develop­ment of a new oil shale pyrolysis process model with combination of the exist­ing vertical retort process (VRP) and horizontal rotary-kiln retort process (HRRP) technologies to improve the oil shale process economic gain; 3) discussion of innovative design options to improve the economic performance of the process by utilizing the current new advanced energy storage technology. Investigation of the applicability of the energy storage system (ESS) to the oil shale project was carried out with a sensitivity analysis of its cost-revenue.

References

 

1.       Al-Makhadmeh, L. A., Maier, J., Batiha, M. A., Scheffknecht, G. Oxyfuel technology: Oil shale desulfurization behavior during staged combustion. Fuel, 2017, 190, 229‒236.
https://doi.org/10.1016/j.fuel.2016.11.022

2.       Lee, S. Oil Shale Technology. CRC Press, Boca Raton, Fla., 1991.

3.       Martins, A. Historical overview of using fluidized-bed technology for oil shale combustion in Estonia. Oil Shale, 2012, 29(1), 85‒99.
https://doi.org/10.3176/oil.2012.1.08

4.       Wang, Q., Liu, H. P., Bai, J. R., Qin, H., Yang, W. Application of high-low bed CFB combustion technology to oil shale combustion. Oil Shale, 2013, 30(2), 147‒156.
https://doi.org/10.3176/oil.2013.2.05

5.       Schmidt, J. Oil shale technology challenge. Oil Shale, 2011, 28(1), 1‒3.
https://doi.org/10.3176/oil.2011.1.01

6.       Uchida, T. Present status and the future view of the research and the development of oil shale technology in Japan. Tetsu To Hagane, 1985, 71(7), 775‒783.
https://doi.org/10.2355/tetsutohagane1955.71.7_775

7.       Volkov, E. P. High-efficiency technology for oil shale processing. Editor’s Page. Oil Shale, 2013, 30(2), 95‒100.
https://doi.org/10.3176/oil.2013.2.01

8.       Yang, Q., Qian, Y., Zhou, H., Yang, S. Development of a coupling oil shale retorting process of gas and solid heat carrier technologies. Energ. Fuel., 2015, 29(9), 6155‒6163.
https://doi.org/10.1021/acs.energyfuels.5b01290

9.       Karu, V., Västrik, A., Anepaio, A., Väizene, V., Adamson, A., Valgma, I. Future of oil shale mining technology in Estonia.. Oil Shale, 2008, 25(2S), 125‒134.
https://doi.org/10.3176/oil.2008.2S.04

10.    Miao, L., Ji, G., Gao, G., Li, G., Gan, S. Extraction of alumina powders from the oil shale ash by hydrometallurgical technology. Powder Technol., 2011, 207(1‒3), 343‒347.
https://doi.org/10.1016/j.powtec.2010.11.017

11.    Turning a Problem into a Resource: Remediation and Waste Management at the Sillamäe Site, Estonia (Rofer, C. K., Kaasik, T., eds.). Proceedings of the NATO Advanced Research Workshop, held in Tallinn, Estonia, 5‒9 October 1998. Kluwer Academic Publishers, Dordrecht Boston, 2000.

12.    Fägerlind, J. Cost Analysis for Crushing and Screening – Part II. In: Division of Production and Materials Engineering, Lund University. Lund University, 2015, 31 pp.

13.    Qian, J., Yin, L. Oil Shale ‒ Petroleum Alternative. 1 ed. China Petrochemical Press, Beijing, 2010.

14.    Atherton, J., Sharma, R., Salgado, J. Techno-economic analysis of energy storage systems for application in wind farms. Energy, 2017, 135, 540‒552.
https://doi.org/10.1016/j.energy.2017.06.151

15.    Chen, C., Duan, S., Cai, T., Liu, B., Hu, G. Optimal allocation and economic analysis of energy storage system in microgrids. IEEE T. Power Electr., 2011, 26(10), 2762‒2773.
https://doi.org/10.1109/TPEL.2011.2116808

16.    Díaz-González, F., Sumper, A., Gomis-Bellmunt, O. Energy Storage in Power Systems. Wiley, Chichester, England, 2016.
https://doi.org/10.1002/9781118971291

17.    Du, P., Lu, N. Energy Storage for Smart Grids: Planning and Operation for Renewable and Variable Energy Resources (VERs). First edition. Academic Press, London, England, 2015.

 

Back to Issue