headerpos: 9513
 
 
  Oil Shale

ISSN 1736-7492 (electronic)  ISSN 0208-189X (print)
Published since 1984

Oil Shale

ISSN 1736-7492 (electronic)  ISSN 0208-189X (print)
Published since 1984

Publisher
Journal Information
» Editorial Policy
» Editorial Board
Extra
Guidelines for Authors
» For Authors
» Instructions to Authors
» Copyright Transfer Form
Guidelines for Reviewers
» For Reviewers
» Review Form
Subscription Information
Support & Contact
List of Issues
» 2019
» 2018
» 2017
» 2016
» 2015
Vol. 32, Issue 4
Vol. 32, Issue 3
Vol. 32, Issue 2
Vol. 32, Issue 1
» 2014
» 2013
» 2012
» 2011
» 2010
» 2009
» 2008
» Back Issues
» Back issues (full texts)
  in Google
Publisher
» Other journals
» Staff

INTERDEPENDENCE BETWEEN POINT LOAD INDEX, COMPRESSIVE STRENGTH AND CRUSHING RESISTANCE OF JORDAN OIL SHALE AND RELATION TO CALORIFIC VALUE; pp. 252–268

(Full article in PDF format) doi: 10.3176/oil.2015.3.05


Authors

VIVIKA VÄIZENE, INGO VALGMA, JÜRI-RIVALDO PASTARUS, ENNO REINSALU, ERKKI KAISLA

Abstract

Rock parameters are important to be considered in mine design. Physical-mechanical tests were carried out on oil shale and dolostone samples from the Attarat Um Ghudran oil shale area in central Jordan, in order to determine the rock mass properties. It was necessary for assessing the feasibility of excavation and processing. Half-core and core samples were compressed up to failure during the Point Load Test (PLT) and Uni­axial Compressive Strength Test (UCST), respectively, and the PLT index (PLTI) and compressive strength were calculated. A conversion factor between PLTI and UCS for Jordan oil shale and dolostone was determined. The Crushing Resistance Test (CRT) on samples was conducted. Taking into consideration confidence limits, the recommended conversion factor 1 for Attarat oil shale and dolostone is respectively 14 and 12 and the recommended conversion factor 2 is 33 and 12, respectively. This knowledge is relevant in designing selective excavation and dry separation of oil shale.

Keywords

Uniaxial Compressive Strength, Point Load Test index, crushing resistance, conversion factor, oil shale, dolostone, Rock mass factor.

References

Valgma , I. Oil Shale mining-related research in Estonia. Oil Shale , 2009 , 26(4) , 445–450.
http://dx.doi.org/10.3176/oil.2009.4.01

Valgma , I. , Väizene , V. , Kolats , M. , Saarnak , M. Technologies for decreasing mining losses. Environmental and Climate Technologies , 2013 , 11(1) , 41–47.
http://dx.doi.org/10.2478/rtuect-2013-0006

Tohver , T. Utilization of waste rock from oil shale mining. Oil Shale , 2010 , 27(4) , 321–330.
http://dx.doi.org/10.3176/oil.2010.4.05

Valgma , I. , Reinsalu , E. , Sabanov , S. , Karu , V. Quality control of oil shale production in Estonian mines. Oil Shale , 2010 , 27(3) , 239–249.
http://dx.doi.org/10.3176/oil.2010.3.05

Väizene , V. , Valgma , I. , Iskül , R. , Kolats , M. , Nurme , M. , Karu , V. High selective oil shale mining. Oil Shale , 2013 , 30(2S) , 305–325.
http://dx.doi.org/10.3176/oil.2013.2S.10

Valgma , I. , Leiaru , M. , Karu , V. , Iskül , R. Sustainable mining conditions in Estonia. 11th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" , Doctoral School of Energy and Geo­technology , Pärnu , Estonia , 16.–21.01.2012. Tallinn: Elektriajam , 2012 , 229–238.

Valgma , I. Estonian oil shale resources calculated by GIS method. Oil Shale , 2003 , 20(3S) , 404–411.

Valgma , I. Geographical Information System for Oil Shale Mining - MGIS. (PhD Thesis). Tallinn University of Technology Press , Tallinn , 2002.

Koitmets , K. , Reinsalu , E. , Valgma , I. Precision of oil shale energy rating and oil shale resources. Oil Shale , 2003 , 20(1) , 15–24.

Reinsalu , E. Criteria and size of Estonian oil shale reserves. Oil Shale , 1998 , 15(2) , 111–133.

Reinsalu , E. , Valgma , I. Oil shale resources for oil production. Oil Shale , 2007 , 24(1) , 9–14.

Reinsalu , E. Relationship between crude mineral cost and quality. Miner. Resour. Eng. , 2000 , 9(2) , 205–213.
http://dx.doi.org/10.1016/S0950-6098(00)00017-2

Robam , K. , Väizene , V. , Anepaio , A. , Kolats , M. , Valgma , I. Measuring mining influence in the form of students practice in opposition to the emotional environmental impact assessment. In: 5th International Symposium "Topical problems in the field of electrical and power engineering". Doctoral School of Energy and Geotechnology (Lahtmets ,  R. , ed.). Tallinn University of Techno­logy , Tallinn , 2008 , 62–65.

Reinsalu , E. , Valgma , I. Geotechnical processes in closed oil shale mines. Oil Shale , 2003 , 20(3S) , 398–403.

Orru , M. , Vaizene , V. , Pastarus , J.-R. , Systra , Y. , Valgma , I. Possibilities of oil shale mining under the Selisoo mire of the Estonia oil shale deposit. Environ­mental Earth Sciences , 2013 , 70(7) , 3311–3321.
http://dx.doi.org/10.1007/s12665-013-2396-x

Erg , K. , Reinsalu , E. , Valgma , I. Geotechnical processes and soil-water move­ment with transport of pollutants in the Estonian oil shale mining area. In: Proceedings of the 4th International Scientific and Practical Conference on Environment. Technology. Resources. 4th International Scientific and Practical Conference on Environment. Technology. Resources , 26.–28. June 2003 , Rezekne , 2003 , 79–84.

Valgma , I. Post-stripping processes and the landscape of mined areas in Estonian oil shale open casts. Oil Shale , 2000 , 17(2) , 201–212.

Valgma , I. , Karu , V. , Viil , A. , Lohk , M. Oil shale mining developments in Estonia as the bases for sustainable power industry. In: 4th International Symposium "Topical Problems in the Field of Electrical and Power Engineering": Doctoral School of Energy and Geotechnology. 4th International Symposium "Topical Problems in the Field of Electrical and Power Engineering" , Kuressaare , Estonia , 15.–20.01.2007 (Lahtmets , R. , ed.). Tallinn University of Technology , Faculty of Power Engineering , Tallinn , 2007 , 96–103.

Karu , V. , Västrik , A. , Valgma , I. Application of modelling tools in Estonian oil shale mining area. Oil Shale , 2008 , 25(2S) , 135–144.
http://dx.doi.org/10.3176/oil.2008.2S.05

Santi , P. M. Field methods for characterizing weak rock for engineering. Environ. Eng. Geosc. , 2006 , XII(1) , 1–11.
http://dx.doi.org/10.2113/12.1.1

Bell , F. G. , Lindsay , P. Durability of shales of the Pietermaritzburg Formation , greater Durban area , South Africa. In: Engineering Geology and the Environ­ment: Proceedings of the 8th International Conference of the IAEG , Vancouver , British Columbia , Canada , 21–25 September , 1998 (Moore , D. , Hungr , O. , eds.) , 1–5 , 275–282.

Hoek , E. , Diederichs , M. S. Empirical estimation of rock mass modulus. Int. J. Rock Mech. Min. Sci. , 2006 , 43(2) , 203–215.
http://dx.doi.org/10.1016/j.ijrmms.2005.06.005

Wirtgen Surface Mining Manual. Application and Planning Guide. Wirtgen GmbH , 2010 , p. 200.

Rusnak , J. , Mark , C. Using the point load test to determine the uniaxial com­pressive strength of coal measure rock. In: Proceedings of the 19th Inter­national Conference on Ground Control in Mining , August 8–10 , 2000 , Morgan­town , West Virginia (Peng , S. S. , Mark , C. , eds.). West Virginia University , Morgantown , 2000 , 362–371.

ISRM. International Society of Rock Mechanics Commission on Testing Methods , Suggested Method for Determining Point Load Strength. Int. J. Rock Mech. Min. Sci. & Geomech. Abstr. , 1985 , 22 , 51–60.
http://dx.doi.org/10.1016/0148-9062(85)92327-7

Heidari , M. , Khanlari , G. R. , Mehdi Torabi Kaveh , Kargarian , S. Predicting the uniaxial compressive and tensile strengths of gypsum rock by point load testing. Rock Mech. Rock Eng. , 2012 , 45 , 265–273.
http://dx.doi.org/10.1007/s00603-012-0264-8

Digital Rock Strength Index Apparatus 45-D0550/E. Instruction Manual , 2007.

Methodology of Taking Samples and Determination of Physical-Mechanical Parameters of the Rock. Skotchinski Institute of Mining Engineering , Academy of Science , Soviet Union , Moscow , 1984 , p. 23 (in Russian).

Hoek , E. Practical Rock Engineering. Rocscience , 2007.

Karu , V. , Västrik , A. , Anepaio , A. , Väizene , V. , Adamson , A. , Valgma , I. Future of oil shale mining technology in Estonia. Oil Shale , 2008 , 25(2S) , 125–134.
http://dx.doi.org/10.3176/oil.2008.2S.05

Taylor , J. R. An Introduction to Error Analysis: The Study of Uncertainties in Physical Measurements (Commins , E. D. , ed.). University Science Books , Sausalito , California , 1982 , 272 pp.

Väli , E. , Valgma , I. , Reinsalu , E. Usage of Estonian oil shale. Oil Shale , 2008 , 25(2S) , 101–114.

Haabu , T. Evaluation of Selective Crushing. Master Thesis. TUT Department of Mining , Tallinn , 2010.

Cobanoglu , I. , Celik , S. B. Estimation of uniaxial compressive strength from point load strength , Schmidt hardness and P-wave velocity. Bull Eng Geol Environ , 2008 , 67(4) , 491–498.
http://dx.doi.org/10.1007/s10064-008-0158-x

Unrug , K. F. Characterization of rock strength and jointing in situ. In: Rock Mechanics for Industry: Proceedings of the 37th U.S. Rock Mechanics Symposium , Vail , Colorado , USA , 6–9 June 1999 (Amadei , B. , Kranz. R. L. , Scott , G. A. , Smeallie , P. H. , eds.) , 1–2 , 999–1006.

 
Back

Current Issue: Vol. 36, Issue 3, 2019




Publishing schedule:
No. 1: 20 March
No. 2: 20 June
No. 3: 20 September
No. 4: 20 December