|
|
References
1. Krutasova , Е. Reliability of Power Equipment Metal. Energoatomizdat , Moscow , 1981 (in Russian). 2. Berezina , Т. , Bugay , N. and Trunin , I. Diagnosis and Prognosis of Power Equipment Metal Life. Тekhnika , Kiev , 1991 (in Russian). 3. Antikain , P. Metals and Stress Calculation of Boilers and Piping. Energiya , Moscow , 1990 (in Russian). 4. Berezina , T. Key to Steels and Alloys in Thermal Engineering. Handbook. Chelyabinsk , 2004 (in Russian). 5. Ray , A. K. , Tiwari , Y. N. , Sinha , R. K. , Chaudhuri , S. and Singh , R. Residual life prediction of service exposed main steam pipe of boilers in a thermal power plant. Eng. Failure Anal. , 2000 , 7 , 359–376.
doi:10.1016/S1350-6307(99)00024-2 6. Nakoneczny , G. J. and Schultz , C. C. Life Assessment of High Temperature Headers. Babcock & Wilcox , 1995. 7. Cheruvu , N. S. Degradation of mechanical properties of Cr-Mo-V and 2.25 Cr-1Mo steel components after long-term service at elevated temperatures. Metall. Trans. , 1989 , V 20A(1) , 87–97. 8. Smirnova , A. , Balashov , Y. , Tikhonova , T. and Ivanova , L. Degradation of structure and mechanical properties of steel 20 during long-term operation at temperatures higher than 450 °C. Teploenergetika , 1993 , 11 , 11–13 (in Russian). 9. RD 10-577-03 Instruction of Metal Control and Life Extension of Basic Components of Boilers , Turbines and Piping at Power Plants , 2003 (in Russian); http://www.tehdoc.ru/ files.2045.html (26.03.09). 10. Dedov , A. , Klevtsov , I. , Lausmaa , T. and Neshumayev , D. Method of small samples for assessment of properties of power plant components: sampling devices and stress concentration in dimples. In Proc. Conference Plant Maintenance for Managing Life & Performance BALTICA VII , 2007 , vol. 2 , 180–192. 11. Manahan , M. , Argon , A. and Harling , O. The development of a miniaturised disk bend test for the determination of post-irradiation mechanical properties. J. Nucl. Mater. , 1981 , 103–104 , 1545–1550.
doi:10.1016/0022-3115(82)90820-0 12. Fleury , E. and Ha , J. S. Small punch tests to estimate the mechanical properties of steels for steam power plant. I. Mechanical strength. II. Fracture toughness. Int. J. Pressure Vessels Piping , 1998 , 75 , 699–713.
doi:10.1016/S0308-0161(98)00074-X 13. Parker , J. , Stratford , G. , Shaw , N. , Spink , G. and Metcalfe , H. The application of miniature disc testing for the assessment of creep damage in CrMoV rotor steel. In Proc. Conference Plant Maintenance for Managing Life & Performance BALTICA IV , 1998 , vol. 2 , 477–488. 14. Brookfield , D. , Li , W. , Rodgers , B. , Mottershead , J. , Hellen , T. , Jarvis , J. , Lohr , R. , Howard-Hildige , R. , Carlton , A. and Whelan , M. Material properties from small specimen using the punch and bulge test. J. Strain Anal. , 1999 , 34 , 423–435.
doi:10.1243/0309324991513867 15. Husain , A. , Sehgal , D. and Pandey , R. Design of a simple , versatile , small-specimen punch test setup for determination of the mechanical behavior of materials. Exp. Techn. , 2002 , 33–38. 16. Ruan , Y. , Spätig , P. and Victoria , M. Assessment of mechanical properties of the martensitic steel EUROFER97 by means of punch tests. J. Nucl. Mater. , 2002 , 307–311 , 236–239.
doi:10.1016/S0022-3115(02)01194-7 17. Campitelli , E. , Spätig , P. , Bonadé , R. , Hoffelner , W. and Victoria , M. Assessment of the constitutive properties from small ball punch test: experiment and modelling. J. Nucl. Mater. , 2004 , 335 , 366–378.
doi:10.1016/j.jnucmat.2004.07.052 18. Milička , K. and Dobeš , F. Small punch testing of P91 steel. Int. J. Pressure Vessels Piping , 2006 , 83 , 625–634.
doi:10.1016/j.ijpvp.2006.07.009 19. Egan , P. , Whelan , M. , Lakestani , F. and Connelly , M. Small punch test: An approach to solve the inverse problem by deformation shape and finite element optimization. Comput. Mater. Sci. , 2006 , 40 , 33–39.
doi:10.1016/j.commatsci.2006.10.021 20. Manahan , M. , Browning , A. , Argon , A. and Harling , O. The use of small-scale specimens for testing irradiated material. ASTM-STP 888 , American Society for Testing and Materials , Philadelphia , PA , 1986. 21. CEN Workshop Agreement , CWA 15627:2006 E , “Small Punch Test Method for Metallic Materials”. CEN , Brussels , Belgium , December 2007. 22. Klevtsov , I. , Dedov , A. , Bogolyubova , E. and Boyarinova , T. Direct measurement of mechanical properties of metal to be used in manufacture of power plant equipment. Thermal Eng. , 2008 , 55 , 431–434.
doi:10.1134/S0040601508050133
|
